3T-AM shifts from prototypes to production as repeat orders reach 70% of revenue

Commercial director Eddie Andrews explains how a product-owner model, in-house CNC machining and printers bought against contracted work changed the Newbury metal AM manufacturer.

3T-AM, the Newbury-based metal additive manufacturing business, now draws around 70% of its revenue from production orders rather than one-off prototypes, according to commercial director Eddie Andrews. New product introduction, by contrast, still absorbs roughly 80% of the team's time.

Andrews joined the company in November 2021, when it could already make a single metal component for any one of hundreds of customers. The harder problem was winning the order to make the same part again, at the agreed price and on schedule. "How do you make that boring?" he recalled asking. "How do you make that general manufacturing?"

Machines bought against orders

One answer shows in the order book for its EOS metal printers. Previously the firm might have bought an M400 to trial a different material and see what business it could develop. Now, Andrews says, customers' programmes account for the capacity of incoming machines before they reach the factory. "The investment is quite boring, actually."

Demand is strongest from semiconductor customers, followed by energy, then space and defence. Aerospace remains central to the company's plans, but 3T-AM has found work for its machines while it waits for more aerospace programmes to reach suppliers at volume.

A 2021 reset, and a new owner

Andrews dates the business to 1997 and recalls its first metal machine arriving around 2008. By the 2021 reset, years of accommodating individual prototype jobs had left process after process on the shop floor. The company narrowed its customer base, gave larger accounts more influence over what it developed and simplified procedures that had accumulated. Much of the work stayed manual while the team established which operations it could reliably repeat.

Who owned a job mattered as much as the equipment. When the first person to see a drawing was the engineer responsible for printing it, the natural question was how to print it, and decisions taken at that point shaped the work handed to everyone else. Today a product owner is responsible for delivering the finished component, and print and machining specialists agree what condition a part should be in as it passes from one operation to the next.

"To become a successful additive manufacturer, you need to be a really good CNC machining company," Andrews said. Bringing machining in-house gave the SME more control over cost, quality and delivery dates, while larger multi-laser machines improved productivity at the printing stage.

The commercial shift was harder to time: production orders rose and then tapered off, and turning away too much prototype work during the upswing would have left gaps when it eased. Repeat orders now give 3T-AM room to choose which development jobs to take, even though some will never become production contracts.

Austrian precision manufacturing group SBO acquired 3T-AM in October 2025; the Newbury business had generated around £5 million in sales in 2024. SBO approved a five-year business plan and asked whether it could be executed quicker. In August 2026 the group reported that 3T-AM had added an EOS M400 in the second quarter, ordered another printer and invested further in post-processing, as part of a seven-printer expansion across UK and US operations.

A full order book makes the next machine easier to justify, but also leaves little time on that machine to qualify a different material or develop a new product. Andrews wants to keep two distinct reasons to invest: contracted demand, and the work 3T-AM cannot yet offer. He cites a pre-pandemic aerospace enquiry in which a single family of parts would have required 16 multi-laser systems to cover only a share of the requirement, and sees the capital and floor space involved as one reason original equipment manufacturers still keep sizeable additive programmes in-house.

What the customer can measure

For some customers, replacing a casting with a printed part pays through lead time alone: a legacy or development programme can obtain a component sooner even at much the same unit cost. At higher volumes the calculation gets tougher, as maintenance contracts and consumables weigh on the hourly rate and a single-shift factory has fewer productive hours over which to spread them. Andrews sees scope to learn from CNC shops that operate around the clock, and points to support removal as a candidate for automation where the process still depends on what an experienced operator knows about a particular job.

A project with Honeywell Aerospace will put another claim to the test. Under an Aerospace Technology Institute-funded programme, the partners are converting an existing conventionally manufactured component to additive, with the sustainability team at the NCC in Bristol carrying out a 12-month life-cycle assessment covering manufacture, service and end of life. Printing closer to the finished shape should use less feedstock and leave less metal to machine away than starting from billet; the study will compare the two routes alongside any benefit the redesigned part delivers in service.

In Newbury, the intended outcome is something a purchasing department could use. As 3T-AM connects its factory and enterprise systems, it is developing digital product passports to document the carbon associated with making an individual component. By the end of 2028, Andrews wants that information to accompany every part at no extra charge.

MT

Maren Toussaint

Maren Toussaint covers fasteners and builders hardware, including screws, bolts, anchors, rivets, hinges, slides, brackets, casters, springs, and wire forms used in construction and equipment assembly. Her analysis examines thread fit, clamp load, pull-out behavior, corrosion exposure, and hinge or slide cycle durability under stated test conditions rather than relying on catalog claims. She supports Manufacturing Engineers, Quality Engineers, and Hardware Sourcing Managers comparing specifications, interpreting test evidence, and setting inspection or maintenance priorities.