EcoCortec Develops Compostable Stretch and Shrink Films for Industrial Packaging

EcoShrink and EcoWrap are positioned as drop-in replacements for polyethylene film on existing wrapping lines, with industrial compostability certification.

Single-use polyethylene film remains one of the largest sources of unrecyclable plastic waste in manufacturing and logistics, where stretch and shrink films are used mainly for load containment and inventory staging. Rising disposal fees, carbon reporting requirements and regional plastic surcharges are pushing plant managers toward bio-based alternatives that can still run on existing packaging lines.

Mechanical limits of early bio-based films

Earlier bio-based packaging films often lacked the mechanical strength demanded by automated pallet wrappers, leading to frequent tears and load failures in transit. EcoCortec, the European subsidiary of Cortec Corporation, says it developed two certified compostable films for heavy-duty industrial use — EcoShrink and EcoWrap — to address those limits. Both are manufactured at the company's facility in Croatia and are positioned as direct replacements for conventional polyethylene, so operations teams can keep their existing wrapping equipment and workflows.

EcoShrink for heat-shrink protection

EcoShrink is aimed at heat-shrinking oversized equipment and smaller components. According to Cortec, the film is formulated with 45 percent biopolymers sourced from certified commercially compostable resins. Under standard heat it shrinks evenly into a tough barrier that seals out dust, dirt and moisture, protecting loads in transit and during extended outdoor yard storage. The company states the film keeps its structural integrity indefinitely under normal storage conditions and begins breaking down only when exposed to an industrial composting environment.

EcoWrap for automated pallet wrapping

EcoWrap is described as the first commercially available compostable, industrial-strength stretch film. It carries OK compost INDUSTRIAL certification from TÜV Austria under EN 13432 and ASTM D6400. A specialized tackifier formulation is intended to overcome common bioplastic performance limits, supplying the cling and stretch elasticity needed on standard automated wrapping equipment without machine retrofits or workflow adjustments. Cortec says the film's high tensile strength lets operators secure heavy pallet loads with fewer wraps than conventional stretch film, cutting material consumption per unit shipped and reducing exposure to plastic taxes and landfill surcharges.

Composting route and target applications

Both films are designed for commercial composting facilities. EcoWrap is said to break down alongside organic waste into nutrient-rich soil for agricultural use, provided the material reaches such a facility. Cortec lists manufacturing, e-commerce, agriculture and logistics as target operations, and argues that used packaging can be routed to local commercial composting sites instead of waste compactors, allowing packaging engineers and logistics managers to pursue waste-reduction targets without compromising load integrity or shipping protection.

The performance, shelf-life and compostability claims in the announcement are the company's own; the source material does not include independent test data or verification for specific regional waste systems.

IS

Ingrid Solberg

Ingrid Solberg is an editorial analyst covering electrical enclosures, junction boxes, cable glands, wiring devices, and cable management for industrial and commercial installations. Her articles use IEC 60529 IP ratings, applicable NEMA enclosure types, conductor and connector ratings, and supplier traceability documents to compare products without treating a standard as proof that a specific model is certified. She helps contractors, panel builders, and purchasing teams check ingress suitability, panel fit, replacement compatibility, and documentation before specifying or sourcing equipment.