Fives High Precision Machines (Fives HPM) has introduced the Liné Machines RoboTDM, a robotic system that performs milling, trimming and drilling directly on large workpieces instead of moving them into the working envelope of a large CNC machine tool. The company positions the system for applications where tolerances of roughly 0.1 mm are acceptable — a band in which, it argues, the cost and footprint of a large machine tool may buy capability the part does not need.
The approach pairs an industrial robot with a dedicated end effector carrying a spindle, toolholder and cutter, so material removal happens at the component rather than at a machine. According to Fives, that arrangement shortens set-up, simplifies programming and reduces equipment requirements compared with routing the same work through a CNC machine tool, which typically involves substantial set-up time and programming effort.
Closing the accuracy gap
Industrial robots have historically been limited by positional accuracy, with conventional systems reaching about 0.3 mm — too loose for many machining tasks. Fives says its development work concentrated on that gap through high-precision robotic machining. Robot calibration combined with look-ahead and motion-planning algorithms allows programs containing more than one million points to run without the latency that would otherwise disturb robot motion, producing smoother trajectories that support multi-axis contouring and complex operations. The company states that RoboTDM can reduce machining deviation by up to 100 μm (0.1 mm), a threefold improvement on conventional robotic accuracy.
Configurations and tooling
The machining end effector can be specified according to the task. Fives lists spindle power of up to 125 kW, torque of up to 80 Nm and speeds reaching 30,000 rpm, with HSK A63, HSK F63 or HSK A100 taper toolholders. Options include automatic tool changing, tool measurement, tool-breakage detection and part probing, and a vision system can support drilling. The platform is not restricted to machining: it can also be configured for waterjet cutting, laser profiling and ultrasonic cutting.
Typical operations cited by the company include face milling and deburring, such as removing burrs from castings and trimming excess weld beads, drilling pilot holes on large aerospace panels or automotive body parts, and trimming, routing, drilling, edge contouring and pocketing on large composite or thermoplastic fabrications.
Trials and expected gains
Fives reports that a multi-year research and development project with development trials demonstrated cycle-time reductions of up to 70% in trimming and milling, with some individual applications achieving greater savings. The system can be configured with multiple workstations and customised peripheral equipment, and its relatively modest foundation requirements are presented as simplifying installation compared with a large CNC machine tool.
The company sees the strongest fit in aerospace, defense, maritime and energy, where components are often large or awkward to move and production requirements vary. It is explicit about the limits: where tolerances tighter than 0.1 mm are needed, a high-precision CNC machine tool remains the appropriate choice, making RoboTDM a complement to the wider Fives HPM portfolio rather than a replacement for it.
Fives Liné Machines Inc, now part of Fives HPM, has operated in North America for almost 50 years from its facility in Granby, Quebec, Canada, which produces Liné CNC machine tools and robotic solutions including RoboTDM and also supports engineering, integration, automation, service and training across equipment lifecycles.
