I've been managing procurement for our company's facilities for over five years. We have 200 employees across three locations, and I process about 60-80 orders annually—roughly $50,000 in building maintenance supplies, including roofing materials. When I started, I thought buying roof tiles was like buying office supplies: find the lowest price and click 'order.' I was wrong. Here are the questions I hear most from colleagues and other admins, along with what I've learned the hard way.
What are the main types of roofing materials for commercial buildings?
The short answer: asphalt shingles, metal roof tiles, clay or terracotta tiles, and—more recently—solar tiles. Each has trade-offs. Asphalt shingles (including three-tab and architectural styles) are the most common because they're affordable and easy to install. Metal roof tiles (often called metal shingles or sheet metal tiles) offer durability and energy efficiency, but cost more upfront. Clay and terracotta roof tiles are premium options with excellent longevity and curb appeal, but they're heavy and require specialized installation. Solar tiles are a newer category that combines roofing with power generation—still niche but growing.
I've ordered all of these at some point, except solar tiles (we're not there yet). The key is matching the material to the building's needs, not just the sticker price. If you're working with ceramic roof tile manufacturers or an ASA roof tile factory, ask for samples and test reports.
How do I compare costs between different roofing materials?
This is where most buyers get tripped up. The per-square-foot price of the material is only part of the story. You also need to factor in installation labor, underlayment, flashing, removal of the old roof, and possibly structural reinforcement (clay tiles are heavy). From quotes we've received in 2024–2025, asphalt shingles tend to have the lowest upfront material cost—often $1.50 to $3.50 per square foot for materials alone, depending on grade. Metal roof tiles typically run $4 to $8 per square foot for materials, while clay or terracotta tiles can be $8 to $15 or more. But installation can easily double those numbers, and metal or clay often require specialized contractors.
What I wish I'd known earlier: total cost of ownership matters more than upfront price. A cheaper asphalt roof might need replacement in 15-20 years, while a metal roof can last 40-70 years. If you're planning to stay in the building, the math shifts. Also, don't forget roof insulation sheets and vented ridge tiles—they add to the budget but affect energy efficiency.
What should I ask roofing suppliers before placing an order?
Here's my checklist, learned from a few painful mistakes:
- Can you provide proper invoicing? I once found a great deal on clay tiles from a new supplier. They gave me a handwritten receipt. Finance rejected the expense report, and I had to eat $2,400 from our department budget. Now I verify invoicing capability before any order.
- What's the lead time, and is it guaranteed? Late materials can stall a project and make you look bad to operations.
- Do you have test reports for key standards? For asphalt shingles, ask about ASTM D3462. For clay tiles, ASTM C1167. Don't just take their word for it—ask for documentation.
- What's the warranty, exactly? Get it in writing. I still kick myself for not documenting a verbal promise on a tile order. When a batch arrived chipped, we had no recourse.
- Can you handle returns or defects? A reliable supplier will have a clear process.
How important is installation quality compared to material quality?
Critical. You can buy the best terracotta tiles in the world, but if they're installed wrong, you'll have leaks. In my experience, installation is 50-70% of the total project cost, and it's where most problems originate. We once hired a low-bid contractor to install metal shingles. They didn't follow the manufacturer's specs for fastening. Two years later, we had water damage. The material was fine; the installation was not.
So when you evaluate bids, don't just compare material prices. Ask who's doing the installation, check their references, and make sure they're certified by the manufacturer if applicable. Tile roofing contractors should be able to show you past projects.
What are the hidden costs in roofing projects?
Plenty. Beyond materials and labor, watch for: removal and disposal of the old roof (can be $1-3 per square foot), underlayment and flashing (often not included in material quotes), permits (varies by city), and insulation upgrades (if you're already up there, it might make sense). Also, if you're switching from asphalt to clay tiles, you may need structural reinforcement—that's a big one.
I always ask for a line-item quote that separates materials, labor, disposal, and permits. If a supplier won't break it down, that's a red flag. And be wary of 'cheap roof tiles' that seem too good to be true—they often are.
How has the roofing industry changed in the last 5 years?
Quite a bit. What was best practice in 2020 may not apply in 2025. For one, metal roof tiles have become more popular and more affordable, with better coatings and finishes. Solar powered roof tiles are emerging, though still expensive. Manufacturing has improved—ASA roof tile factories (which make synthetic tiles that mimic clay or slate) are producing more realistic and durable products. Colored roofing options have expanded, and metal clay tile roofs (hybrids) are gaining traction. But the fundamentals haven't changed: proper installation, quality materials, and reliable suppliers still matter most.
I've also seen more suppliers offering online ordering and better digital documentation, which makes my job easier. But I still verify everything.
What's the biggest mistake buyers make when sourcing roof tiles?
Focusing only on the lowest price and ignoring vendor reliability. I get it—budgets are real. But the cheapest quote often comes with hidden costs: poor communication, late deliveries, no support when something goes wrong. To be fair, not every budget vendor is bad. But you need to do your homework.
My advice: ask for references, check their invoicing and warranty processes, and start with a small trial order if possible. That trial might cost a little more upfront, but it can save you from a much bigger headache. It took me three years and about 150 orders to understand that vendor relationships matter more than vendor capabilities.
Do I need to worry about certifications?
Yes, but don't assume. Ask for specific test reports. For example, asphalt shingles should meet ASTM D3462 (for dimensional stability and weather resistance). Clay tiles should meet ASTM C1167. Metal roofing should meet ASTM E2140 for water penetration. I'm not a roofing engineer, so I rely on these standards as a baseline. If a supplier can't provide documentation, that's a signal.
Also, check if the manufacturer offers a warranty that's tied to proper installation. Some warranties are void if the installer isn't certified.
That's the short version. If you're new to managing roofing procurement, start with a clear checklist, get everything in writing, and don't be afraid to ask questions. The industry is evolving, but the basics of good purchasing remain the same.